Tag: Output


by skyeslee

Article by Fly

The PowerPC e200z6 Nexus module supports Nexus Class 1 and Class 3 featuresClass 1 features such as breakpoint generation, single stepping, and internal resource access (processor halted) are handled within the processor’s JTAG-based static debug OnCE (aFreescale proprietary on-chip emulation) block. Watchpoints for Nexus3 are also generated within the OnCE module. These eight watchpoints (for various programming events) can be used to trigger trace-enable/disable, generateThe DMA Nexus module supports tracing data reads and writes on the peripheralmodules for the shared port and controls the port settings (MCKO divide ratio, port-width option).The second example is from a family of wireless baseband processors nicknamed.

The DSP sub-system supports a slightly more enhanced set of debug facilities. The major architectural blocks consist of:The SC1400 Nexus modules also support Nexus Class 1 and Class 3 features as well as the optional features of watchpoint trigger-enable of program/data tracing and data-acquisition messaging for data logging. In addition, the Nexus3 module supports vendor-definedtriggering of program/data tracing using the process ID, and specific messages for reporting core performance profiling information from the SC1400 debug and profiling unit (DPU).

Class 1 features such as breakpoint generation, single stepping, and internal resource access (processor halted) are handled within theprocessor’s JTAG-based static debug block, EOnCE. Watchpoints for Nexus3 are also generated within the EOnCE module. Theseseven watchpoints (for various programming events) can be used to trigger trace enable/disable and generate watchpointmessages, and can be connected to a cross-triggering module for triggering events in other portions of the SoC. They alsodrive an optional EVTO output pin.

The AHB Nexus module supports tracing data reads and writes on the peripheral bus and can generate additional watchpoints based onAHB address and/or data values. These watchpoints can also be used by a cross-triggering module within the SoC. Additional AHBNexus modules support data trace on the application side (ARM11) of the baseband as well.Similar to the MPC5500 family, the Nexus port controller module arbitrates between the various debug modules for the shared port. In addition to the arbitrationthe debug system by maintaining an “absolute” timestamp value that the individual Nexus modules can use within their messages or to generate their own “relative” timestamp to reduce bandwidth penalty.

The mxC SoCs also support internal storage of Nexus messages to an internal Nexus trace buffer (NTB) for retrieval at a later time. These messages are sent to AHB memory within the SoC, which allocates a secondary function for the storage of trace information. This information can be read out through the JTAG port (or other memory-access mechanism) when real-time visibility is not as critical. This allows more trace data to be stored by reducing bandwidth restrictions associated with sending data off-chip.

Nexus has been evolving as an IEEE standard for several years and is seeing increased use as a debug solution in many different architectures and markets. Using Nexus provides several advantages to designers, providing a widely supported infrastructure and a framework for customized solutions. As an “architecture-agnostic” interface, Nexus also provides advantages to tool vendors by reducing development costs and time to market. Freescale has been an industry leader in developing Nexus-based solutionswithin the IEEE-ISTO 5001 consortium is continually working to add feature enhancements to the standard and support for a wider range of SoC architectures.

EJTAG is a hardware/software sub-system that provides comprehensive debugging and performance-tuning capabilities to MIPSTechnologies-developed processors and to SoC components with MIPS processor cores. Like many other processor debug blocks, ituses the IEEE 1149.1 JTAG TAP as an external interface. HigherperformanceEJTAG is tightly coupled to the MIPS instruction set and is typically packaged as part of a MIPS processor license as an optional resource architecture for processor and system debugging Fig. 12.1. The MIPS architecture has historically provided a set of primitives for debugging software, which includes:ETJAG has evolved, and there is limited backward compatibility between the current 5.x version and earlier versions, especially for revisions 2.5 and earlier. This is sometimes a problem because different processors may use different versions of EJTAG. As a prominent example, the Toshiba TXseries of MIPS processors use a circa 2.5 level of EJTAG that diverges sufficiently from current EJTAG in terms of register usage andnaming, as well as changes in debug instructions and other features,

The EJTAG registers are generally 32 bits wide for MIP32 architectures and 64 bits wide for MIPS64 architecture, so specific bitmappings depend on implementation.Registers set up the debug resources and capture debug status information during the debugoperation. Registers are memory-mapped and accessible from the EJTAG probe. Operation of the EJTAG circuitry is controlledthrough an EJTAG probe that interfaces the host development system and the target device. There are numerous probesavailable that support EJTAG.

The PowerPC e200z6 Nexus module supports Nexus Class 1 and Class 3 featuresClass 1 features such as breakpoint generation, single stepping, and internal resource access (processor halted) are handled within the processor’s JTAG-based static debug OnCE (aFreescale proprietary on-chip emulation) block. Watchpoints for Nexus3 are also generated within the OnCE module. These eight watchpoints (for various programming events) can be used to trigger trace-enable/disable, generateThe DMA Nexus module supports tracing data reads and writes on the peripheralmodules for the shared port and controls the port settings (MCKO divide ratio, port-width option).The second example is from a family of wireless baseband processors nicknamed.

The DSP sub-system supports a slightly more enhanced set of debug facilities. The major architectural blocks consist of:The SC1400 Nexus modules also support Nexus Class 1 and Class 3 features as well as the optional features of watchpoint trigger-enable of program/data tracing and data-acquisition messaging for data logging. In addition, the Nexus3 module supports vendor-definedtriggering of program/data tracing using the process ID, and specific messages for reporting core performance profiling information from the SC1400 debug and profiling unit (DPU).

Class 1 features such as breakpoint generation, single stepping, and internal resource access (processor halted) are handled within theprocessor’s JTAG-based static debug block, EOnCE. Watchpoints for Nexus3 are also generated within the EOnCE module. Theseseven watchpoints (for various programming events) can be used to trigger trace enable/disable and generate watchpointmessages, and can be connected to a cross-triggering module for triggering events in other portions of the SoC. They alsodrive an optional EVTO output pin.

The AHB Nexus module supports tracing data reads and writes on the peripheral bus and can generate additional watchpoints based onAHB address and/or data values. These watchpoints can also be used by a cross-triggering module within the SoC. Additional AHBNexus modules support data trace on the application side (ARM11) of the baseband as well.Similar to the MPC5500 family, the Nexus port controller module arbitrates between the various debug modules for the shared port. In addition to the arbitrationthe debug system by maintaining an “absolute” timestamp value that the individual Nexus modules can use within their messages or to generate their own “relative” timestamp to reduce bandwidth penalty.

The mxC SoCs also support internal storage of Nexus messages to an internal Nexus trace buffer (NTB) for retrieval at a later time. These messages are sent to AHB memory within the SoC, which allocates a secondary function for the storage of trace information. This information can be read out through the JTAG port (or other memory-access mechanism) when real-time visibility is not as critical. This allows more trace data to be stored by reducing bandwidth restrictions associated with sending data off-chip.

Nexus has been evolving as an IEEE standard for several years and is seeing increased use as a debug solution in many different architectures and markets. Using Nexus provides several advantages to designers, providing a widely supported infrastructure and a framework for customized solutions. As an “architecture-agnostic” interface, Nexus also provides advantages to tool vendors by reducing development costs and time to market. Freescale has been an industry leader in developing Nexus-based solutionswithin the IEEE-ISTO 5001 consortium is continually working to add feature enhancements to the standard and support for a wider range of SoC architectures.

EJTAG is a hardware/software sub-system that provides comprehensive debugging and performance-tuning capabilities to MIPSTechnologies-developed processors and to SoC components with MIPS processor cores. Like many other processor debug blocks, ituses the IEEE 1149.1 JTAG TAP as an external interface. HigherperformanceEJTAG is tightly coupled to the MIPS instruction set and is typically packaged as part of a MIPS processor license as an optional resource architecture for processor and system debugging Fig. 12.1. The MIPS architecture has historically provided a set of primitives for debugging software, which includes:ETJAG has evolved, and there is limited backward compatibility between the current 5.x version and earlier versions, especially for revisions 2.5 and earlier. This is sometimes a problem because different processors may use different versions of EJTAG. As a prominent example, the Toshiba TXseries of MIPS processors use a circa 2.5 level of EJTAG that diverges sufficiently from current EJTAG in terms of register usage andnaming, as well as changes in debug instructions and other features,

The EJTAG registers are generally 32 bits wide for MIP32 architectures and 64 bits wide for MIPS64 architecture, so specific bitmappings depend on implementation.Registers set up the debug resources and capture debug status information during the debugoperation. Registers are memory-mapped and accessible from the EJTAG probe. Operation of the EJTAG circuitry is controlledthrough an EJTAG probe that interfaces the host development system and the target device. There are numerous probesavailable that support EJTAG.

About the Author

Fly a professianl writer , it provides the high quality products, such as China Circuit Assemblies, China Flexible PCB, Automated Pcb Assembly, and many more.

Tags: , ,

Demonstration video of the micro HDMI output of the HTC Evo 4G phone. Youtube comments have been disabled. For comments or questions, head over to: androidforums.com I will answer comments and questions there. Prior reviews/demos of the Evo HDMI out: news.cnet.com www.pcmag.com androidandme.com gadgetblips.dailyradar.com I’m using an Amzer Micro HDMI cable (cable says v.1.3) purchased on eBay from “wireless4cheap.” The seller took a significantly long time to ship (two weeks), but he at least included a free screen protector. There have been reports of people with cables purchased from this seller that haven’t worked, so take that into consideration as well. Shot with a Panasonic Lumix LX3 @ 720p. Television used is a 55″ Vizio VF551XVT that was purchased late November 2009.
Video Rating: 4 / 5

FINALMENTE comincia la FESTA di RUOSINA (SERAVEZZA)…….. AMICI VECCHI E NUOVI…. DIVERTITEVI FINO ALL’OSSO !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Vi ricordo che sabato 17 luglio comincia la “mitika” sagra a Ruosina di Seravezza dove si mangia bene e si balla di tutto fino a tardi con Celestino, dj ma col vizio del sax e dei balli di gruppo per tutti quelli che si vogliono veramente divertire. Tel 347 3561659(Celestino) … Ruosina è una delle poche feste che ho in Versilia …. dopo c’è la Pupporina a Bozzano poi a Farnocchia, la Bruschetta a Quiesa e alcuni campeggi… ma poi il resto sono feste lontanissime come la Festa Democratica a Firenze o privèè …. ….dimenticavo la festa termina domenica 1 agosto. Tutti i fine settimana dal 17 luglio …. grande festa…”MITIKA” la sagra a Ruosina di Seravezza con Celestino dj di RMS….. vi aspetto in pista. “….e cantare? Non si canta ??? ….certo che si può anche cantare,…. ma presto o tardissimo.Magari durante la cena ore 19,30-20, ho invitato Valentina, Brunello, Rossana, Fabio,Marika e chi vuol cantare…. poi, come sempre la baby dance, balli gruppo x bambini….quest’anno ballo novità “IL BALLO DEL POPPANTE” conducono Samuele e Martina , un po di ballabile…qualche suonata al “sax dei ricordi” (brutto vizio ma piace… a qualcuno) …poi …..discolatindanceballogruppodiscolatindanceballogruppodiscolatindanceballogruppodiscolatindanceballogruppodiscolatindanceballogruppodiscolatindanceballogruppo

Tags: , , ,

Video Rating: 4 / 5

Tags: , , , , , ,

The Motorola Xoom, along with the new Apple iPad 2, has a slick HDMI out port. This port mirrors anything that’s on your screen, and is quick slick. In this video, I’ll quickly show you how it works, what makes it so cool, and how it compares to the similar feature on the iPad 2. Full post: www.mickmel.com Also check out my “Xoom vs. iPad 2″ post: www.mickmel.com

Here is part 2 of a review for LG’s Full HD 22inch edge LED backlit LCD TV the 22LE5500. I DO NOT OWN THE RIGHTS TO ANY OF THE MATERIAL DEMONSTRATED IN THE VIDEO
Video Rating: 5 / 5

Tags: , , ,

This video is part of LearnItFirst’s Transact-SQL Programming: SQL Server 2008/R2 course. More information on this video and course is available here: www.learnitfirst.com Now onto one of Scott’s least favorite (but one of the most useful!) syntaxes: the output parameter. The syntax can be confusing, but this video should help clarify many of the tricky aspects of working with output parameters. When and why would you want to use them? Highlights from this video: * Review of stored procedures * What are output parameters? * Output parameter syntax * Capturing the value of an output parameter * Can you have an “output only” output parameter? * Using output parameters vs. returning the select statement and much more
Video Rating: 5 / 5

Tags: , , , ,

Coby 7-Inch 1080p HD Video MP3 Player with 8 GB Flash Memory with HDMI Output (Black)

  • Experience high-definition video, music, photos, and text on a generous 7 inch LCD screen
  • Advanced processing supports 1080p video in a wide range of popular formats
  • Audio: MP3/WMA/FLAC/APE
  • World/alarm clock, calendar, and gaming apps included
  • FM tuner, integrated stereo speakers and 3.5mm headphone jack

Coby’s 7-Inch MP3 8 GB HD Video Player is the ultimate way to enjoy video on the go. Along with great-quality audio and support for music, video and photos, the MP977 features a brilliant 7 inch screen display for a premier viewing experience. Includes USB 2.0 hi-speed for quick, convenient file transfer, with up to 8GB of available memory for storing your complete digital library. Integrated FM radio also included. Advanced processing supports 1080p video in a wide range of popular formats. Con

List Price: $ 119.99

Price: [wpramaprice asin="B0047Q4F4U"]

More Coby Products

Tags: , , , , , , , , , ,
blu ray 3d tv
by hto2008

Article by Fengtao Software

DVDFab Blu-ray 3D Ripper was upgraded to version 8.0.8.5 on March 19, 2011. Till now, it has lots of features and newly improvement, such as “Output two separated files” option, “to M2TS” and “to TS” options in navigation bar, a crash problem fixed for top/bottom output format, etc. More details are showed below.

Previously, Blu-ray 3D Ripper just converts 3D BD to 3D video files as one output file. However, some devices still cannot support one file output for playback, they only accept two separated output files as one for left eye and one for right eye, just like some 3D TVs with old hardware refusing to upgrade frequently. So in order to meet this user’s need, Blu-ray 3D Ripper specially supports this function — Output two separated files — under “3D” tab in “Video Effect Settings” window of software.

Besides, it provides more options into its navigation bar currently. It not only owns MKV, AVI, MP4, and WMV as output 3D video format, but also supports M2TS and TS now. So users can use “to M2TS” and “to TS” option to convert 3D BD movie to M2TS and TS video files. And there are some newly profiles (H.264 and AC3) then inevitably emerge to support the corresponding M2TS/TS output format.

Blu-ray 3D Ripper also fixed a crash problem for top/bottom output format in this version.

About Blu-ray 3D Ripper:It is the world’s first real BD 3D ripping software, which can rip and convert any 3D BD to MKV, WMV, AVI, MP4, M2TS and TS 3D videos for playback on 3D display devices. It supports left/right (side-by-side) or top/bottom 3D format. The users are able to choose 50% or 100% video frame size. They can also select to export two separate files other than one file based on their choice. Just like all products under DVDFab, Blu-ray 3D Ripper is also enough powerful to provide superior speed and wonderful quality, and very easy to use. More detailed features can be accessed by http://www.dvdfab.com/blu-ray-3d-ripper.htm.

About the Author

About Fengtao Software:Fengtao Software is a professional multimedia software provider always dedicated to the work on DVD/Blu-ray copy/ripping/conversion/decryption, video conversion and file transfer to take care of all your needs, with its powerful products such as DVD Copy, DVD Ripper, Blu-ray Copy, Blu-ray Ripper, Blu-ray to DVD Converter, Passkey for DVD, Passkey for Blu-ray, Blu-ray 3D Ripper, Passkey Lite (free), Video Converter, File Transfer, HD Decrypter (free), Virtual Drive (free), etc. For more information, please visit http://www.dvdfab.com.

Related Blu Ray 3d Tv Articles

Tags: , , , , , , , , ,

Article by Jhon

DVDFab was lunched a new product 2D to 3D Converter on May 9, 2011, which is added to DVD Ripper, Blu-ray Ripper, and Video Converter as a “2D to 3D” option. At present, DVDFab now is the world’s first and full-function software that has the ability to rip and convert a normal 2D DVD, 2D video and 2D Blu-ray to fantastic 3D output videos identical to the real 3D in a number of popular video formats which can be played on computer, some compatible 3D TV, or other compatible 3D display devices.

“2D to 3D” Supported Converted Formats:With “2D to 3D” option enabled, DVDFab DVD Ripper can read a 2D DVD movie disc/backup folder/image file on a PC’s hard drive as source, and convert it to 3D video(s) available in the following formats: AVI, MP4, MKV, and FLV; For DVDFab Blu-ray Ripper, the output 3D video(s) can be AVI, MP4, MKV, M2TS, and TS; While DVDFab Video Converter is able to convert a normal video saved on the computer to 3D video(s) like AVI, MP4, MKV, and FLV. To learn more regarding DVDFab DVD Ripper, Blu-ray Ripper, and Video Converter, please go to dvdfab.com.

Custom 3D Videos:The output 3D video by 2D to 3D Converter can be freely personalized just like in DVDFab Blu-ray 3D Ripper. Users can select the video frame size 100% or 50%; the 3D format as Left/Right, or Top/Bottom; and choose to output two separate files (one for left eye, one for right eye). That is, similar to a normal 2D video in DVDFab, the output 3D video can also be resized or cropped as you need.

Would you like to get more detailed information of DVDFab 2D to 3D Converter? Please visit this product page: http://www.dvdfab.com/2d-to-3d-converter.htm.

Price and Availability:The price of this powerful and amazing DVDFab 2D to 3D Converter is .00, and is available at dvdfab.com.

About Fengtao Software:Fengtao Software is a professional multimedia software provider always dedicated to the work on DVD/BD copy/ripping/conversion/decryption, video conversion, 2D to 3D conversion, and file transfer to take care of all your needs, with its powerful products such as DVD Copy, DVD Ripper, Blu-ray Ripper, 2D to 3D Converter, Passkey for DVD, Passkey Lite (free), Blu-ray to DVD Converter, Video Converter, File Transfer, HD Decrypter (free), Virtual Drive (free), Blu-ray 3D Ripper, etc.

About the Author

Fastest DVD & Blu-ray copy software from DVDFab. Copy Blu-ray & DVD to portable devices, convert your favorite movie to any media format including DVDR and iPad/iPhone/iPod. All-in-one DVD&Blu-ray software.

Find More 2d To 3d Conversion Tv Articles

Tags: , , , , , , , ,
Back to top